Different Types of Bitumen, their Properties and Uses

Bitumen is available in the following forms 

  1. Cutback Bitumen
  2. Bitumen Emulsion
  3. Bitumen Primer 
  4. Modified bitumen

1. Cutback bitumen

Normal practice is to heat bitumen to reduce its viscosity. In some situations preference is given to use liquid binders such as cutback bitumen. In cutback bitumen suitable solvent is used to lower the viscosity of the bitumen. From the environmental point of view also cutback bitumen is preferred. The solvent from the bituminous material will evaporate and the bitumen will bind the aggregate.
Cutback bitumen is used for cold weather bituminous road construction and maintenance. The distillates used for preparation of cutback bitumen are naphtha, kerosene, diesel oil, and furnace oil.

Types of Cutback bitumen

There are different types of cutback bitumen are available which are:

  1. Rapid curing (RC),
  2. Medium curing (MC), and
  3. Slow curing (SC).

RC is recommended for surface dressing and patchwork.

MC is recommended for premix with less quantity of fine aggregates.

SC is used for premix with appreciable quantity of fine aggregates.

Image result for Cutback bitumen
cutback bitumen

2. Bitumen Emulsion

Bitumen emulsion is a liquid product in which bitumen is suspended in a finely divided condition in an aqueous medium and stabilized by suitable material. Normally cationic type emulsions are used in India. The bitumen content in the emulsion is around 60% and the remaining is water. When the emulsion is applied on the road it breaks down resulting in release of water and the mix starts to set. The time of setting depends upon the grade of bitumen.

The viscosity of bituminous emulsions can be measured as per IS: 8887-1995.

Types of Bitumen Emulsion:

Three types of bituminous emulsions are available which are:

  1. Rapid setting (RS)
  2. Medium setting (MS)
  3. Slow setting (SC)

Bitumen emulsions are ideal binders for hill road construction. Where heating of bitumen or aggregates are difficult.

Rapid setting emulsions are used for surface dressing work.

Medium setting emulsions are preferred for premix jobs and patch repairs work.

Slow setting emulsions are preferred in rainy season.

Related image
bitumen emulsion

3. Bituminous primers

In bituminous primer the distillate is absorbed by the road surface on which it is spread. The absorption therefore depends on the porosity of the surface. Bitumen primers are useful on the stabilized surfaces and water bound macadam base courses.

Bituminous primers are generally prepared on road sites by mixing penetration bitumen with petroleum distillate.

Image result for Bituminous primers
Bituminous primers

4. Polymer-Modified Bitumen

Certain additives or blend of additives called as bitumen modifiers can improve properties of Bitumen and bituminous mixes. Bitumen treated with these modifiers is known as modified bitumen. Polymer modified bitumen (PMB)/ crumb rubber modified bitumen (CRMB) should be used only in wearing course depending upon the requirements of extreme climatic variations.

The detailed specifications for modified bitumen have been issued by IRC: SP: 53-1999. It must be noted that the performance of PMB and CRMB is dependent on strict control on temperature during construction.

The advantages of using modified bitumen are as follows:

  • Prevention of cracking and reflective cracking.
  • Lower susceptibility to daily and seasonal temperature variations.
  • Higher fatigue life for mixes.
  • Better age resistance properties.
  • Better adhesion between aggregates and binder.
  • Higher resistance to deformation at high pavement temperature.

    Image result for Modified Bitumen
    Modified Bitumen

 

Subscribe & Watch Technical video’s related to civil engineering on our YouTube channel We Civil Engineers

Related Post

Advertisements

Comment Here